Cooline DWL SERIES Guía de usuario descargar pdf (Pagina 7)

USER’S GUIDE

InRow RC ACRC100 Series

Initial setup

You must define the following three TCP/IP settings for the InRow RC before it can

operate on the network:

• IP address of the Management Card

• Subnet mask

• IP address of the default gateway

Internal Management Features

Overview

You can manage the InRow RC through the Web interface, display interface, control

console, Modbus, or SNMP. SNMP requires the PowerNet

MIB, available on the

Utility CD or from the APC Web site, www.apc.com.

Never use the loopback address (127.0.0.1) as the default gateway

address for the InRow RC. Doing so will disable the unit and will

require you to reset TCP/IP settings to their defaults using a local

serial login.

To use a DHCP server to configure the TCP/IP settings for an InRow

RC, see TCP/IP settings.

To configure the TCP/IP settings, see the InRow RC Installation and

Quick Start Manual, provided in printed form and in PDF on either the

Utility CD or on the APC Web site, www.apc.com.

For more information about the menu-driven interfaces of the InRow RC,

see Web Interface and Control Console.

1 2 3 4 5 6 7 8 9 10 11 12 ... 102 103

Sin comentarios

Cooline DWL SERIES Guía de usuario Pagina 7